Hello all.
Whiplash turbine heli. Xicoy x45h. Jeti ds-24ii and spirit gtr.
i updated to the 4.0 firmware on my whiplash turbine and all is well except the governor is not responding properly. I did a re learn on my turbines which is a xicoy x45h. The issue is the when i switch to bank 1 and 2 the turbine will accelerate to the headspeed but then the turbine rpm drop. I have tried increasing the throttle curve for the banks and that doesnt work. Is there something am messing in the governor settings?
V/r
Karl
Governor issues with 4.0 firmware
Can you attach settings for each of your bank? I will check it. Bank files are enough.
Spirit System developer
Tomas, attached are the banks as requested.
- Attachments
-
- whiplash_bank2.4ds
- Governor enabled_HS1900
- (255 Bytes) Downloaded 94 times
-
- whiplash_bank1.4ds
- Governor enabled_HS1750
- (255 Bytes) Downloaded 94 times
-
- whiplash_bank0.4ds
- Bank0_ Governor disabled
- (255 Bytes) Downloaded 89 times