Hi hopefully someone is able to help, please.
I have a GT with 2 DSMX satellite receivers (SPM9645)bound to a Spektrum DX9 which has worked flawlessly however I have upgraded my transmitter to a NX10+ and no matter what I do "BIND FAILED" is all I get!!
The bind plug is inserted into the ELE/PIT/AIL port and the GT is powered by a Kontronik Jive on 6S (Nimbus 550) Sats flash but unable to bind.
Please note I have already updated 5 other helicopters with various other Spirit FBL ( original red, black & Pro) with no problems at all but cannot get the GT and sats to bind. I have also changed the satellites to a brand new SPM9745 with the same result and the frame rate in the NX10 is set to 'automatic' . When the bind fails the satellites stop flashing and the lights go out but the GT is still powered with a blue light.
Any advice would be appreciated.
Regards
Ken
BINDING SATELLITES
Hi,
the problem could be that NX10 is limited to 22ms frame rate. With this settings you have to bind Spirit unit in the same way.
This can be done by inserting 2 bind plugs - one at the SYS port and second at the ELE/PIT/AIL. Then it should be all OK.
the problem could be that NX10 is limited to 22ms frame rate. With this settings you have to bind Spirit unit in the same way.
This can be done by inserting 2 bind plugs - one at the SYS port and second at the ELE/PIT/AIL. Then it should be all OK.
Spirit System developer