Wiring Spirit 3 with Jeti Recivers

In case you do not know something or you are not sure, here is the right place for your question.
Post Reply
helischober
Posts: 5
Joined: Fri 17. Feb 2023 12:07:04

Does the wiring Spirit 3 at the same as Spirit 2 or other?
because the discription on Spirit Wiki are not clear.it shoes only the wiring for Spirit 2 on place for Spirit 3
Top
Sepp62
Posts: 53
Joined: Sat 07. Feb 2015 22:14:51

It is like GT. Just plug your receiver into RUD.
Top
ZeXx86
Site Admin
Posts: 12943
Joined: Mon 29. Apr 2013 16:06:44
Contact:
Contact ZeXx86

Confirm. Wiring is same as GT,
please see our manual:
https://manual.spirit-system.com/index. ... _Spirit_GT
Spirit System developer
Top
helischober
Posts: 5
Joined: Fri 17. Feb 2023 12:07:04

Thank's for clearify.
And how do they set up the cabling for telemetry, e.g. YGE?
Top
ZeXx86
Site Admin
Posts: 12943
Joined: Mon 29. Apr 2013 16:06:44
Contact:
Contact ZeXx86

Please proceed according our manual:
https://manual.spirit-system.com/index. ... _Telemetry

More recent YGE ESCs have required telemetry cable in the box.
Spirit System developer
Top
helischober
Posts: 5
Joined: Fri 17. Feb 2023 12:07:04

Thank you very much for that information too
Top
Post Reply

Return to “Support”