Wiring Spirit 3 with Jeti Recivers

[helischober]

Does the wiring Spirit 3 at the same as Spirit 2 or other?
because the discription on Spirit Wiki are not clear.it shoes only the wiring for Spirit 2 on place for Spirit 3

[Sepp62]

It is like GT. Just plug your receiver into RUD.

[ZeXx86]

Confirm. Wiring is same as GT,
please see our manual:
https://manual.spirit-system.com/index. ... _Spirit_GT

[helischober]

Thank's for clearify.
And how do they set up the cabling for telemetry, e.g. YGE?

[ZeXx86]

Please proceed according our manual:
https://manual.spirit-system.com/index. ... _Telemetry

More recent YGE ESCs have required telemetry cable in the box.

[helischober]

Thank you very much for that information too

[helischober]

Will all ESC data from, say, the YGE ESC be transferred, or just the data mentioned in the wiki?

[Sepp62]

Just the ones mentioned in the Wiki (7 values). You also can see the supported values from the PC config app Advanced/ESC telemetry/Telemetry variables (depending on the selected ESC type).

"External" sensors are currently limited to one physical interface (Sat1) and ESCs (besides the Xicoy ECU).

It is a pity, that there is no(t yet a) generic telemetry interface, which supports every type of telemetry value. The Spirit proprietary interface is not yet documented, so there are no 3rd party solutions also (oXs, uniSense, vSpeak etc.).