USB Connect problem Win 7 64x

In case you would like to see some new feature in the software you can share it right here!
You can also report issue or odd behavior here.
Post Reply
Speedy1899
Posts: 9
Joined: Mon 05. Jan 2015 19:56:36

Hello to all model builders

My name is Phil and i come from Gemany
I am 21 and for 1 year heli pilot
I want to build the system Spirit on my T-rex 450 Pro V2.
Now to my problem :oops:

Unfortunately I can not make connection to the PC, because it recognizes my USB connection as a virtual ballpoint. because after my mouse jumps wildly and sounds on the way everything possible to. Attached is of course everything right. Have already googled a bit, but not really what useful found. Apparently, it must be on the driver. Silicon Labs USB to UART Bridge CP210 driver he shows me in the device manager. lists it to me in the hardware list but as mouse :(.
Have USB 2.0 and 3.0 tried.
am at my wits end and here to help :cry: .

PC System: Win 7 Ultimate 64bit
Did it under win 8 also tested that same game in green.

Yours Greetings from germany

Phil
Top
ZeXx86
Site Admin
Posts: 12782
Joined: Mon 29. Apr 2013 16:06:44
Contact:
Contact ZeXx86

Hi,

most probably problem is just in COM ID.
Can you send me a screenshot from your Device manager?
You can open COM & LPT and there should be the Silabs Device with some COM.

If you can, open properties and set COM port to the lowest possible.
Then unplug and plug the usb interface again and open the software.

You should see the device with configured COM port in list of available devices in the software.
Then all should work without any issue.

Actually this is not a bug, it is Windows feature that it assigning too high COM ports that are not valid. This can happen in case you are using more similar devices. For example Castle Creations USB link, MSH Brain, etc. But then all will be working fine.
Spirit System developer
Top
Speedy1899
Posts: 9
Joined: Mon 05. Jan 2015 19:56:36

ok here.
explanation step by step pls: D

Thank you for the help
Attachments
Unbenannt.PNG
Top
ZeXx86
Site Admin
Posts: 12782
Joined: Mon 29. Apr 2013 16:06:44
Contact:
Contact ZeXx86

Great,
try to change COM9 to for example COM1 or the lowest possible value.

You can use this step by step image howto: viewtopic.php?f=14&t=399
It is in Czech language, but images could be enough.

I can eventually translate it if you wish.
Spirit System developer
Top
Speedy1899
Posts: 9
Joined: Mon 05. Jan 2015 19:56:36

Nice thank you :mrgreen:
Top
Speedy1899
Posts: 9
Joined: Mon 05. Jan 2015 19:56:36

That with the mouse is gone now.
However, I get no connection materialize.
Heli has power and the spirit, the red LED lights up.
USB is in the sys-contact.
Have here once made a picture, maybe you see so what's wrong.
Attachments
mm.PNG
Top
ZeXx86
Site Admin
Posts: 12782
Joined: Mon 29. Apr 2013 16:06:44
Contact:
Contact ZeXx86

Please check polarity on the connector in the unit.
Orange wire must be closer to labels on the unit always.

Other things are looking correct.
Spirit System developer
Top
Speedy1899
Posts: 9
Joined: Mon 05. Jan 2015 19:56:36

Polarity is correct.
When I rebooted the pc today, I again had the problem with the mouse. Com port 1 is set.
a connection to the spirit and I do not get out :(
Top
ZeXx86
Site Admin
Posts: 12782
Joined: Mon 29. Apr 2013 16:06:44
Contact:
Contact ZeXx86

I am afraid, but it could be a bug in Windows mouse driver if it affects your mouse.

Please disconnect all devices from your PC that are not necessary and try it again.
I am little bit confused. Does the connection to the unit ever worked?

Do you use notebook or it is desktop PC?
Spirit System developer
Top
Speedy1899
Posts: 9
Joined: Mon 05. Jan 2015 19:56:36

I use a desktop pc
Top
Post Reply

Return to “Wishlist / Bug report”