[SOLVED] UNEXPECTED BEHAVIOUR AND CRASH

[pabloK]

Hi

I reinstall everithing and put a new spirt and anew satelite unit on this Kit

Everithing runs smooth, but rescue is unpredictable.

At first spool up and in hover, I tried and goes OK, after some maneuvers, I put in hover again and recue goes back and left!!!!

I land the heli and tried and swash goes back


Please help

I bought the spirit because of the rescue mode

thanks

[ZeXx86]

Make sure that piro optimization parameter is correctly configured.
If not, then it will cause unpredictable behavior, so it is very important.

[pabloK]

can you send me any guide, video, link or something to see that?
because it is very dificult to see in the bench and with the cable connected

[pabloK]

FLYING GREAT, RESCUE TOO !!

For improve security in RX matters, and for obvius reasons, what RX do you think is better for this 600L kit?

this one:
http://www.horizonhobby.com/helicopters ... -spmar9310

or this one but with sattelites for carbon fuse?

http://www.horizonhobby.com/radios/airc ... -spmar9020
http://www.horizonhobby.com/radios/airc ... er-spm9646

thank you

[linux-user]

FLYING GREAT, RESCUE TOO !!

For improve security in RX matters, and for obvius reasons, what RX do you think is better for this 600L kit?
this one:
http://www.horizonhobby.com/helicopters ... -spmar9310
or this one
http://www.horizonhobby.com/radios/airc ... -spmar9020

Hi, pabloK

I think, these "Carbon Fuselage antennas" don't help much on a 3D Helicopter which does not have a real fuselage.
You would need to proper mount these long antennas to be clear of the chassis.
3D heli is different than a plane, where you want to mount the sats inside and let only the antenna stick out.

If you want a full receiver instead of 2 sats I would take one with SRXL support (X-Plus in Spektrum speach)
This gives you an option for a single-line connection (When Spirit is supporting "X-Plus" in the future)

Security:
If one single cable of a "Standard receiver setup" fails you aren't any better than if the "single-line connection" fails.
In theory 2 Sats may be more secure than a single receiver, but that depends heavily on the interna of the FBL and the used cables.

ZeXx86 may comment about how secure Spirit can handle a 2 Sat setup.

[pabloK]

Great info

Now I have a spektrum AR8000 Rx wiyh one sat.

I have the cable for second sat directly to spirit, but i do not know if this is better than a conevntional receiver.

Please, let me know

thanks

[ZeXx86]

Support for X-Plus will be added soon.

pabloK: If you are use conventional receiver, then satellite must be always connected to this receiver. If it is connected to the unit, then it is useless.

[pabloK]

I will simplify my question

what do you recomend?

A standard spektrum AR8000 Rx that have one satellite or 2 sattelites direct to the unit spirit (on to the side and one with the adapter cable v2)

If it is the option of the satellites to the spirit, can I use to power the unit the AUX port ? As red and black connected to a 2S lipo and white (signal) connected to the ESC ???


Thanks

[ZeXx86]

I recommend to use classic receiver - this is recommended by Spektrum too.
For small models (450 size) satellite is fine because of weight.

But everybody have different preferences.
If you want to use battery + satellites for powering the unit and servos, you have to unplug red wire from the ESC cable (if your ESC has internal BEC).

[pabloK]

great. thank you