DX8 Rescue

You can write here about anything you want in regard to R/C.
Post Reply
maddog1963
Posts: 4
Joined: Mon 01. Jun 2015 12:27:30

Hi
I want to set the rescue mode to the gear switch on my DX8.
I can assign aux 2 to the switch in system setup/ switch select but very unsure what to set up in the function/monitor or mixing to make it work correctly? Or am I completely wrong in what I am proposing?
Any help please
Top
djhandz
Posts: 51
Joined: Sun 01. Feb 2015 19:10:22

Dx8 has a error when in switch select on dx8 mix is the gear switch. No mixing required
Compass 7hv v2 spirit pro. Compass 7hv v2 spirit pro. Trex 550fl spirit. Heli-x sim. NeXt sim. Pheonix sim. Fms p51 1400 spirit. Coolice 2400watt psu. Pl6. Icharger 206. Peter lynn twister 5.6. Dx9. TM1000.
Top
maddog1963
Posts: 4
Joined: Mon 01. Jun 2015 12:27:30

Thank you, all works now , set a -70 in stabi for normal rescue and when I activate the gear switch I get a maximum 10 degree of positive pitch which should be OK for my sport flying.
Just need to maiden now with the spirit on board.
Top
Post Reply

Return to “General discussion”