Spirit System

Great, so in this case, you should increase Governor Response first.
If you feel that it does not make any difference, try to increase Max. value in the Throttle Range, for example by 5-10 points.

ZeXx86 wrote:Great, so in this case, you should increase Governor Response first.
If you feel that it does not make any difference, try to increase Max. value in the Throttle Range, for example by 5-10 points.

I have the governor response on max and the difference between the max and default isn't noticeable.

And have you a photo of what you mean with throttle range please I doesn't have the software right now maybe I now if I see what you mean what my value is.

Verstuurd vanaf mijn SM-N910F met Tapatalk

In this case, the problem is most probably in the Throttle Range - Max. parameter.
You can try to increase it from 100 to for example 110. Then you should feel difference.

Oké I understand I gonna try that fast as possible thanks man! Hopefully it works I love the unit on its own and using the esc governor but because the hobbywing governor is s**t I must use the spirit for it so hopefully it's gonna works otherwise I must by a new esc

Verstuurd vanaf mijn SM-N910F met Tapatalk

Increase is from 100 to 110 and negative also from -100 to -110 or only the positive side?

Verstuurd vanaf mijn SM-N910F met Tapatalk

No, only 100 to 110. If you will not notice difference, than you can try 120.

Oké thanks

Verstuurd vanaf mijn SM-N910F met Tapatalk

It's help a little with the 110 setting but not very much... Try 120 now? Or what

Verstuurd vanaf mijn SM-N910F met Tapatalk

Yes, you can increase it to 120 until you will hear that there will be excess overspeeding - after some hard manouver RPM will drop slowly from the highest to the requested.

Nope it doesn't work I gonna buy a good esc with a good governor that's the only solution I think

Verstuurd vanaf mijn SM-N910F met Tapatalk