Spirit System

RedJacket wrote:

btheli wrote:I thought the throttle signal and telemetry information were both using the signal wire.

I've started a new thread (topic) for the HW issue.

SC is the throttle cut switch on my Horus
SH is the throttle hold switch on my Horus
I am using the Spirit governor on all my helis.

Thanks.

I have experienced a voltage drop out so taking soft cut mode in CC.

I set current limit as insensitive.

After landing, checked logs from CC. Shows voltage sudden drops.

So this is nothing to do with telemetry...
I am still wondering what caused that.