Spirit System

Hello,

all 16 channels are available. Please try to use other channels. It is possible the channel numbering is not corresponding. But they are moving actually.
We have to check this with a various radios.

ZeXx86 wrote:Hello,

all 16 channels are available. Please try to use other channels. It is possible the channel numbering is not corresponding. But they are moving actually.
We have to check this with a various radios.

hi
The only ch available for bankswitching in unit is ch7.I trye aux2,aux3,aux4 in tx,no respons.
Its only 3 free ch in my DX9.
I can see in funktion thers 16 ch available.But i dont really understand what you wont me to do.

We will get DX9 for testing likely tomorrow to check how it is working there.

According to rcgroups, the AR6610T needs a firmware update to output channels > 6 via SRXL2.

See posts #252, #259, and others, in the New SRXL2 Spektrum Receivers coming - AR6610T, AR637T, SPM9747 thread.

Furthermore, it is stated there that the SRXL2 remotes need an update "for full resolution", too (#265 and following), but it seems that updating the remotes is only necessary to fix the telemetry vario issues, see #295.

chris

Hello,

thank you for the details!
You can share link here.

I've just replied to the rcgroups thread that might help to entirely clarify this issue:

https://www.rcgroups.com/forums/showpos ... tcount=287

Read back a few post from mine, it already seems obvious to me that updating the firmware of the AR6610T will give channels >6 in the SRXL2 protocol.

Furthermore, I've updated my previous post above and inserted the links

chris

Just update mine. Will try to update tomorrow.

Hi
Its wery confusing,all info abaut the AR6610T,but i ordred a Spektrum TX/RX USB Programming Cable SPMA3065 will have it delivered tomorow.
Posting info when RX updated.
Is there anyone done the update,post results?

Never mind.

Anybody else give it a try? I know this is a trying time for everyone. Any update on this? Thanks for you help.