Page 1 of 2

First English Thread

Posted: Thu 31. Jul 2014 21:31:09
by Jman841
I just purchased a Spirit FBL and I am very excited about it!

Hopefully we can get some more thread's going about user experience in english.

Can some people please post their personal experiences with this FBL? How well is the Rescue working? How are the flight characteristics? How well are the stock settings? How is the tuning refinement?

What current issues do you have?

I will run it through it's paces as soon as it comes in and have very high hopes! I would love to hear from others who are using this unit as it is very new!

Re: First English Thread

Posted: Thu 31. Jul 2014 21:38:20
by ZeXx86
You are welcome!

I am very glad you are here.
We can talk here very freely, without any doubts.

Re: First English Thread

Posted: Thu 31. Jul 2014 21:41:11
by ZeXx86
I believe you can expect some feelings few hours later since its night here right now :)

Re: First English Thread

Posted: Thu 31. Jul 2014 21:42:56
by Jman841
For the bluetooth support can you please let me know exactly where each pin is supposed to go?

The TXD, RXD, GRND, and VCC pins go?

Also, is there polarity protection on this unit? If the power is accidently plugged in backwards will it destroy the unit?

Finally, is it possible to run Bluetooth, 2 Sat Rx's and the signal wire for the Gov once that is available?

If not it is not an issue as I can disconnect bluetooth after fine tuning of the system is done, but just curious. I will most certainly like to run the Gov once available and 2 Sat Rx's for safety.

Re: First English Thread

Posted: Thu 31. Jul 2014 21:53:13
by ZeXx86
I'll send you a scheme tommorow. It should be much better.

Remember, it is necessary to set 57600 baud rate, then it should work with all BT modules.

Yes, there is a polarity protection.
Just be carefull with SYS and AIL/PIT/ELE connectors, it is not supposed for power supply.

It should be possible to run all peripherals in same time, but I can't tell you more at this time.

Re: First English Thread

Posted: Thu 31. Jul 2014 21:56:32
by Jman841
Excellent!

Again, thank you for the support, Your quick responses and in depth answers are very much appreciated. I have never seen such great customer support before!

Re: First English Thread

Posted: Thu 31. Jul 2014 22:05:57
by ZeXx86
Big thanks!

Re: First English Thread

Posted: Thu 31. Jul 2014 23:47:25
by Arcicorsa
Here is the picture of connection.. It´s very simple and full work with any BT unit.. It important settings speed of connection if dosen´t work..

Re: First English Thread

Posted: Thu 31. Jul 2014 23:50:24
by ZeXx86
Good job! Thanks :)

I will post official scheme as soon as possible too into new Bluetooth thread.

Re: First English Thread

Posted: Thu 31. Jul 2014 23:58:19
by Arcicorsa
I'm glad help ;-) .