Spirit System

I updated the firmware from 3.2.0 to 3.2.2. When I initiate rescue (acro) on the bench the swash moves slowly to the 80% collective I have selected and after the 1.5 second (by my selection) duration is met it returns to 50% (by my selection)slowly. I reflashed with 3.2.0 and it acts normally. My question is, "is this normal"? I am getting ready for maiden flight and want to test all of the features ie geolink, and rescue.
Thanks

Hello

you can set the speed
Expert Settings -> Rescue - Smoothing factor

You nailed it. On bank 0, it must have defaulted to 10 on the update. Thank you

You are welcome