Page 1 of 1
WiFi Link not found during update 4.0.0 r3 (Update now works)
Posted: Fri 26. Sep 2025 16:29:29
by TrueBuild
Any ideas as to what the problem is.
Yes, I did keep restarting the WiFi-link and made sure the blue light was flashing.
The old version has been working fine with my iPhone.
Someone mentioned a direct link to the PC to update the WiFi link; is that possible?
Another thought:-
My system now has 2.4ghz and 5ghz bluetooth.
Does the WiFi link only use 2.4?
Re: WiFi Link not found during update 4.0.0 r3
Posted: Fri 26. Sep 2025 17:03:34
by davehour
Hello,
Check your Firewall. Disable it while flashing or include the application in permissions.
Re: WiFi Link not found during update 4.0.0 r3
Posted: Fri 26. Sep 2025 21:25:32
by TrueBuild
davehour wrote: Fri 26. Sep 2025 17:03:34
Hello,
Check your Firewall. Disable it while flashing or include the application in permissions.
Thanks for the suggestion.
Tried turning off Firewall and Allowed Wifi-link.exe through the Firewall.
Also tried running the Wifi-link.exe as admin.
Same error messages ;(
While looking at stuff, I notice current WiFi is 5ghz.
Re: WiFi Link not found during update 4.0.0 r3
Posted: Sat 27. Sep 2025 15:50:39
by davehour
Oh, WiFi Link is 2.4GHz.
Re: WiFi Link not found during update 4.0.0 r3
Posted: Sat 27. Sep 2025 19:03:09
by ZeXx86
First you have to connect to the Wifi-Link directly. Make sure your computer is not connected over the ethernet. It has no relation to firmware version, the behavior should be identical with any version.
So I would check whatever changed in your network. It could be just secondary connection that could interfere here, because IP address routing is mismatching when two or more connections are established at the same time.
Re: WiFi Link not found during update 4.0.0 r3
Posted: Sat 27. Sep 2025 21:26:33
by TrueBuild
ZeXx86 wrote: Sat 27. Sep 2025 19:03:09
First you have to connect to the Wifi-Link directly. Make sure your computer is not connected over the ethernet. It has no relation to firmware version, the behavior should be identical with any version.
So I would check whatever changed in your network. It could be just secondary connection that could interfere here, because IP address routing is mismatching when two or more connections are established at the same time.
I found this very helpful [youtube]
https://youtu.be/xzi0oGUc7NI?t=205[/youtube]