Very high values in OpenTX Telemetry

In case you do not know something or you are not sure, here is the right place for your question.
Post Reply
ferdey
Posts: 39
Joined: Thu 10. Jan 2019 0:03:35

Hi,

Just asking this in here, probably not a Spirit issue at all, just checking? Maybe related to OpenTX v2.3.5, on a Taranis X9D+ with a Hobbywing 200A ESC and Spirit Pro. Suddenly I see random very high numbers in Telemetry, such as for ESC Temp max and RPM min (looks like Int32 Max to me).

Any suggestions where to look?

Cheers!
Top
ZeXx86
Site Admin
Posts: 12836
Joined: Mon 29. Apr 2013 16:06:44
Contact:
Contact ZeXx86

Hi,

are you able to downgrade OpenTX firmware and compare the results?
Spirit System developer
Top
Mikej
Posts: 63
Joined: Thu 28. Aug 2014 17:01:01

I have these also - but in my case for Fuel +, which I was using to see maximum vibes

This is with OpenTx 2.3.5, the latest V2.0.1 ACCST firmware using micro Spirit with HW integration and OpenTx integration (2.7.1 version). I foolishly changed the ACCST firmware, Changed the OpenTx firmware and added Fuel+ to my telemetry screen all on the same day so I don't know which one introduced the problem :(
Attachments
Pic 1.jpg
Fuel.jpg
Top
ferdey
Posts: 39
Joined: Thu 10. Jan 2019 0:03:35

ZeXx86 wrote:Hi,

are you able to downgrade OpenTX firmware and compare the results?
Thanks, yes, I think I will do this. It is looking like an ACCST D16 2.0.1 firmware issue.
Top
ferdey
Posts: 39
Joined: Thu 10. Jan 2019 0:03:35

Mikej wrote:I have these also - but in my case for Fuel +, which I was using to see maximum vibes

This is with OpenTx 2.3.5, the latest V2.0.1 ACCST firmware using micro Spirit with HW integration and OpenTx integration (2.7.1 version). I foolishly changed the ACCST firmware, Changed the OpenTx firmware and added Fuel+ to my telemetry screen all on the same day so I don't know which one introduced the problem :(
Yep, that's what I am seeing exactly, I will go back to v1 ACCST D16 firmware I think.
Top
ferdey
Posts: 39
Joined: Thu 10. Jan 2019 0:03:35

I've rolled back to the latest v1 ACCST firmware on my tx and rxs and so far it has not happened again, thanks (although still running OpenTX v2.3.5)
Top
Mikej
Posts: 63
Joined: Thu 28. Aug 2014 17:01:01

Thanks for updating on this - I've only seen it on Fuel+, but I also get a lot of "Sensor Lost" warnings with the V2.0.1, and Fuel+ will keep the weird value as it is a maximum field whereas the other sensors will get overwritten.
Top
ferdey
Posts: 39
Joined: Thu 10. Jan 2019 0:03:35

Mikej wrote:Thanks for updating on this - I've only seen it on Fuel+, but I also get a lot of "Sensor Lost" warnings with the V2.0.1, and Fuel+ will keep the weird value as it is a maximum field whereas the other sensors will get overwritten.
No worries :) I was midly worried when I got an ESC Temp warning 12 seconds into a flight and I glanced down and saw the ESC temp was around 62 million degrees C lol
Top
Mikej
Posts: 63
Joined: Thu 28. Aug 2014 17:01:01

ferdey wrote:
Mikej wrote:Thanks for updating on this - I've only seen it on Fuel+, but I also get a lot of "Sensor Lost" warnings with the V2.0.1, and Fuel+ will keep the weird value as it is a maximum field whereas the other sensors will get overwritten.
No worries :) I was midly worried when I got an ESC Temp warning 12 seconds into a flight and I glanced down and saw the ESC temp was around 62 million degrees C lol
:mrgreen: :mrgreen: :mrgreen:
Top
Mikej
Posts: 63
Joined: Thu 28. Aug 2014 17:01:01

Do you think that I need to worry about my 83,932,936% vibes - bad blade tracking perhaps?? :geek: :geek:
Top
Post Reply

Return to “Support”