Can I use FrSky's Inverted F.Port port?

In case you do not know something or you are not sure, here is the right place for your question.
Post Reply
xoexoe
Posts: 104
Joined: Sat 04. May 2019 17:14:54

I already wired up my Archer RS to use the Inverted S.Bus/F.Port port with Brain2/Ikon2. Now I want to use the same receiver to try out the Spirit GT. Do I need to resolder to the S.Bus port?

Image

Image
Attachments
Screen Shot 2021-08-05 at 8.16.31 PM.png
Screen Shot 2021-08-05 at 8.16.31 PM.png (29.49 KiB) Viewed 789 times
Screen Shot 2021-08-05 at 8.36.20 PM.png
Find me on HeliFreak, username Xoexoe
Top
User avatar
Ahmad.Kassem
Posts: 42
Joined: Tue 06. Jul 2021 13:46:29

Resolder the wire to the third pin (sbus) and flash fport FW and you are good to go

Sent from my SM-N976Q using Tapatalk
Top
User avatar
Ahmad.Kassem
Posts: 42
Joined: Tue 06. Jul 2021 13:46:29

Sorry sport

Sent from my SM-N976Q using Tapatalk
Top
xoexoe
Posts: 104
Joined: Sat 04. May 2019 17:14:54

I want to use F.Port. And I believe there’s no flashing required Archer RS because you can switch protocols from the TX via ACCESS
Find me on HeliFreak, username Xoexoe
Top
ZeXx86
Site Admin
Posts: 12836
Joined: Mon 29. Apr 2013 16:06:44
Contact:
Contact ZeXx86

Hello,

you will need normal/stock wiring of the receiver.
Spirit System developer
Top
xoexoe
Posts: 104
Joined: Sat 04. May 2019 17:14:54

Thank you.
Find me on HeliFreak, username Xoexoe
Top
Post Reply

Return to “Support”