Default Spirit II Defective From New, I Think

[mcfast]

Hi Guys

I got this Spirit II last year but it has never functioned right, I think? I just noticed it lately trying to do a setup on my gasser.
On my T-REX 500, I was able to cheat in the radio to get the 500 to fly, but not the greatest.

This is the problem that I have when I am in the recovery mode or setup wizard when I go to the limits page and adjust the pitch range, I can adjust all the pitch range I need and more, but once I'm unplugged for the PC and reboot the unit the pitch never goes past 5°no matter what I do, pitch curve 100%, servo endpoints 100% the only way I can get a bit of more pitch is to go past, 100% in the endpoints, I am getting up to about 7°, not enough, it was all right for the 500 but not enough for the gasser.

PS I also have a Spirit GT on my Goblin and it works perfectly happy with it, very happy!

[Mattes61]

Hello,
for help you must give a bit more detailed information -
What receiver, what transmitter, what protocoll etc.
Make some pictures from your setup in the spirit settings and/or crate a .4ds settings file of your configuration in the FBL.
Post the file here in the forum (attachment) -

Another question why have you not informed the costumer support that your FBL is not working correctly ? Why have you waited so long to do something about it?

Regards

[mcfast]

Receiver, Futaba R2008SB, Transmitter Futaba T14SG on 2.4 S-FHSS using S-Bus

"why have you not informed the costumer support that your FBL is not working correctly"
I had it on a T-Rex 500 and by cheating in the radio I got it to fly OK not great, I really noticed a problem when I wanted to set up my Gasser helicopter, that's when I saw the problem just lately, need more than five to seven degrees on the main blades to fly good, I all so have a Spirit GT on a Goblin 700 all most the same setup it is perfect!

[ZeXx86]

Hello,

please share your Spirit Settings file (4ds from Backup tab)
You shared only PDF log. The problem will be related just to the settings.

[mcfast]

Hello again, I put all the files I could find in the spirit file installed on my PC. Now how do I send them to you?
Do you have a current email address that I can use to send the file?

Thanks in advance
John McDonald

[Mattes61]

Hello,
save your settingsfile out of the Spirit Settings Program as you see here:

then load it up here in the forum as attachment:

Regards

[mcfast]

I am really not good with this PC stuff, I tried to download the files and I can't do it, if someone wants to do a screen share setup, give me a time and date and I'll set everything up, maybe we can get the information you need that way, if not, I will send the unit in, to Spirit to get a look at, I will pay the shipping it is better then a non-functioning unit.

Thanks John

[Mattes61]

Hello that's not rocket science, look at this:
Follow these steps:
Click on save

Enter a name

Click on save

Now in this folder is the file, here in my example C:\Program Files (x86)\Spirit Settings

That's all !

[mcfast]

All is good, it was the setup, me bad.